 |
|
NYLENE 2407 HSSP |
|
TECHNICAL DATA SHEET |
|
| General Description |
- High viscosity nylon copolymer with high impact resistance and superior flexibility
- Optimized with good melt strength for high line speeds in thin wall sections, and is available in natural and black
- 2407 HSSP is one of a family of grades specifically designed for the convoluted tubing industry, but can also be used for other extrusions and some molded parts
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | ISO 527 |
MPa |
45 |
| Elongation @ Break | ISO 527 |
% |
300 |
| Flexural Modulus | ISO 978 |
MPa |
800 |
| Notched Izod @ 23 °C | ISO 180 |
J/m |
20 |
| Tensile Modulus | ISO 527 |
MPa |
900 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL | ISO 75 |
°C |
39 |
| Melt Flow | ISO 1133 |
dg/min |
3 avg |
| Melt Point | ISO 11357 |
deg;C |
218 |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/22