 |
|
NYLENE 321 HS |
|
TECHNICAL DATA SHEET |
|
| General Description |
- Impact modified, heat stabilized nylon 6 injection molding resin.
- Inherent heat and chemical resistance typical of nylon 6 resins, while having higher toughness for uses where some impact may occur during service
- Suitable for such applications as clips, fasteners, safety restraint components, and uses which require higher toughness and flexibility
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
8,000 (55) |
| Elongation | D638 |
% |
100 |
| Flexural Modulus | D790 |
psi MPa |
280,000 (1,930) |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
3.5 (187) |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 264 psi/1.82 MPa | D648 |
°F °C |
129 (54) |
| Melt Point | D3418 |
°F °C |
420 (215) |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23