 |
|
NYLENE 400 |
|
TECHNICAL DATA SHEET |
|
| General Description |
- Specially polymerized nylon 6 resin possessing high clarity and very low viscosity
- Designed specifically for use in manufacturing concentrates and other compounding uses
- The low viscosity of Nylene 400 aids in dispersion and mixing of concentrates and pigments, and can be used as a carrier for both type 6 and type 6/6 nylons
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
11,500 |
| Elongation | D638 |
% |
40 |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
0.8 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 264 psi/1.82 MPa | D648 |
°F °C |
154 |
| DTUL @ 66 psi/0.45 MPa | D648 |
°F °C |
360 |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23