NYLENE 402
TECHNICAL DATA SHEET

 
General Description    

  • Offers outstanding toughness and flexibility.
  • Exhibits excellent flow properties at temperature and pressure settings suitable for a wide variety of general purpose molding applications
  • Optimum processing conditions should provide a melt temperature of 450°F-470°F at nozzle.
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
7,500
Elongation
D638
%
300
Flexural Modulus
D790
psi MPa
150,000
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
2.4
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
133
DTUL @ 66 psi/0.45 MPa
D648
°F °C
320
 
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.


Issued: 2009/09/23