 |
|
NYLENE 404 |
|
TECHNICAL DATA SHEET |
|
| General Description |
- General purpose un-reinforced, heat stabilized nylon 6 injection molding resin
- High flow characteristics at minimal processing temperatures
- Suitable for applications in both thin and heavy sections that require typical nylon characteristics and easy molding
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
11,500 (79) |
| Elongation at Break | D638 |
% |
40 |
| Flexural Modulus | D790 |
psi (MPa) |
390,000 (2,690) |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
0.8 (43) |
| Notched Izod @ -40 °C | D 256 |
ftlbf/in (J/m) |
0.3 (16) |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 1820 KPa | D648 |
°F °C |
154 (68) |
| DTUL @ 455 KPa | D648 |
°F °C |
360 (182) |
| Melting Point | D 3418 |
°F °C |
420 (215) |
| Approvals and Classifications | Approval | Rating | |
| All colors at 1.47 mm | UL 94 | V-2 | |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23