 |
|
NYLENE 4214-15 HS |
|
TECHNICAL DATA SHEET |
|
| General Description |
- 15% glass fiber reinforced, impact modified, heat stabilized nylon 6
- Improved strength and stiffness over unreinforced nylons, and improved impact resistance over typical reinforced grades, especially in dry conditions
- Suitable for handles, levers, support brackets, and other applications which require this unique blend of properties
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
10,200 (70) |
| Elongation | D638 |
% |
5 |
| Flexural Modulus | D790 |
psi MPa |
420,000 (2,895) |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
4.7 251 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 264 psi/1.82 MPa | D648 |
°F °C |
392 (200) |
| Melt Point | D3418 |
°F °C |
419 (215) |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/22