 |
|
NYLENE 452 |
|
TECHNICAL DATA SHEET |
|
| General Description |
- Plasticized, injection molding nylon for use in applications requiring high flexibility, excellent toughness, and abrasion resistance, due to internal lubricant and high monomer content
- Performs well in critical molding processes requiring very good melt flow
- Optimum processing conditions should provide a melt temperature of 450°F-470°F at the nozzle
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
9,000 |
| Elongation | D638 |
% |
360 |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
3.5 |
| Notched Izod @ -40 °C | D256 |
ft. lb./ in. J/m |
0.4 @ -40 21 @ -40 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 264 psi/1.82 MPa | D648 |
°F °C |
132 |
| DTUL @ 66 psi/0.45 MPa | D648 |
°F °C |
305 |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23