![]() |
|
NYLENE 453 |
|
TECHNICAL DATA SHEET |
General Description |
- UV-stabilized, high viscosity nylon resistant to degradation by ultraviolet light
- The elevated quality of UV resistance provided by 453 is attributed to highly uniform dispersion of 2% carbon black
- With cylinder temperatures of 525°F-550°F and mold temperatures of 140°F-60°F, Nylene 453 can be molded into parts having a uniform, glossy appearance. (Available in black only)
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
---|---|---|---|
Mechanical Properties | Test Method |
Units |
Dry as Molded |
Tensile Strength | D638 |
psi MPa |
10,900 |
Elongation | D638 |
% |
20 |
Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
0.7 |
Thermal Properties | Test Method | Units | Dry as Molded |
DTUL @ 264 psi/1.82 MPa | D648 |
°F °C |
160 |
DTUL @ 66 psi/0.45 MPa | D648 |
°F °C |
375 |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23