 |
|
NYLENE 5233 HS |
|
TECHNICAL DATA SHEET |
|
| General Description |
- 33% glass fiber reinforced heat stabilized nylon 6 injection molding resin.
- High heat and chemical resistance inherent in nylon type resins, along with higher strength and stiffness due to glass fiber reinforcement.
- Excellent surface appearance when processed in a warm mold.
- Suitable for brackets, levers, handles, enclosures, and other applications where high physical properties combined with good appearance are required.
- The ASTM line call out for this product is D4066 PA022G33
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
23,500 (162) |
| Elongation at Break | D638 |
% |
3 |
| Flexural Modulus | D790 |
psi MPa |
1,350,000 (9,310) |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
2.1 (112) |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 1820 KPa | D648 |
°F °C |
410 (210) |
| Melt Point | D3418 |
°F °C |
420 (215) |
| Approvals and Classifications | Approval | Rating | |
| Automotive Approvals | MS-DB41 CPN 3465 | ||
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer?s facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/22