 |
|
NYLENE 601 |
|
TECHNICAL DATA SHEET |
|
| General Description |
- Heat stabilized version of NYLENE 600 which is a general purpose, medium viscosity, extrusion grade resin used in applications such as rods, slabs, and tubing
- Other applications include wire jacketing and centrifugal casting which require good dielectric properties, toughness, and fatigue resistance
- Optimum processing conditions should provide a melt temperature of 480°F - 500°F at the die
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
12,000 |
| Elongation | D638 |
% |
70 |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
0.7 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 264 psi/1.82 MPa | D648 |
°F °C |
167 |
| DTUL @ 66 psi/0.45 MPa | D648 |
°F °C |
347 |
| Approvals and Classifications | Approval | Rating | |
| UL Flammability Rating | 94V-2@0.058" | ||
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23