NYLENE 603
TECHNICAL DATA SHEET

 
General Description    

  • Plasticized, high residual monomer resin designed for extrusion applications requiring excellent flexibility, high strength and good abrasion resistance
  • Applications include flexible tubing, cable jacketing, and mono-filament extrusion such as fish line and netting, sewing thread, and weaving thread
  • Optimum processing conditions should permit for a melt temperature of approximately 450°F at the die.
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
12,800
Elongation
D638
%
250
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
3.5
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
160
DTUL @ 66 psi/0.45 MPa
D648
°F °C
335
 
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.


Issued: 2009/09/23