NYLENE 607
TECHNICAL DATA SHEET

 
General Description    

  • Very high viscosity extrusion resin having an ASTM relative viscosity of 800
  • Excellent structural strength, durability, and physical properties
  • Good melt strength and good draw-down properties which promote dimensional control for extrusion of pipe, tubing, film, and sheet
  • Particularly recommended for the extrusion of thick slab, large rod stock, and large complex profiles
  • Optimum processing conditions should permit for a melt temperature of 550 - 575°F at the die.
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
12,300
Elongation
D638
%
210
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
0.9
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
149
DTUL @ 66 psi/0.45 MPa
D648
°F °C
367
 
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.


Issued: 2009/09/23