 |
|
NYLENE 724 |
|
TECHNICAL DATA SHEET |
|
| General Description |
- Heat stabilized version of 721 which is a medium-impact modified nylon for fast, easy molding
- In addition to heat stabilization to prevent thermal degradation, parts molded from Nylene 724 have good impact strength right out of the mold without post conditioning
- Stiffness is near that of unmodified nylon 6
- Barrel temperatures should be in the 450°F - 500°F range.
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
9,000 (62) |
| Elongation at Break | D638 |
% |
200 |
| Flexural Modulus | D790 |
psi MPa |
315,000 (2,170) |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
3.0 (160) |
| Notched Izod @ -40 °C | D256 |
ft. lb./ in. J/m |
0.5 @ -40 27 @ -40 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 1820 kPa | D648 |
°F °C |
145 (63) |
| DTUL @ 455 kPa | D648 |
°F °C |
338 (170) |
| Melt Point | D3418 |
°F °C |
430 (221) |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23