 |
|
NYLENE 7250C HS |
|
TECHNICAL DATA SHEET |
|
| General Description |
- Glass and ceramic fiber reinforced nylon 6 injection molding material
- Designed to provide high dimensional stability, very high stiffness, and a hard surface, while maintaining the heat and chemical resistance typical of nylon products
- Suitable for such uses as valve bodies, pump housings, hydraulic fittings and couplings, and other applications which require this unique set of characteristics
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
18,000 (124) |
| Flexural Modulus | D790 |
psi MPa |
1,500,000 (10,345) |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
1.3 (70) |
| Thermal Properties | Test Method | Units | Dry as Molded |
| Melt Point | D3418 |
°F °C |
420 215 |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23