 |
|
NYLENE NX3024 |
|
TECHNICAL DATA SHEET |
|
| General Description |
- Medium
viscosity, extrusion grade nylon 6 resin suitable for film co-extrusion,
coatings, and compounding applications
- Excellent melt stability and good melt strength
- Excellent grease resistance, toughness, resistance to abrasion, and does not absorb food odors
- Meets the requirements of FDA regulation 21 CFR 177.1500 for direct food contact
- Optimum processing conditions should provide a melt temperature of 480 - 500°F at the die
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi |
12,000 |
| Elongation | D638 |
% |
70 |
| Flexural Modulus | D790 |
psi |
15,000 |
| Notched Izod | D256 |
ft. Lb./in. |
0.7 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 264 psi/1.82 MPa | D648 |
°F °C |
124 (68) |
| DTUL @ 64 psi/0.45 MPa | D648 |
°F °C |
360 (182) |
| Melt Point | D3418 |
°F °C |
428 (220) |
| Approvals and Classifications | Approval | Rating | |
| FDA/NSF Approval | Regulation 21 CFR 177.1500 | ||
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/12/15