 |
|
NYLENE NX4728 HS |
|
TECHNICAL DATA SHEET |
|
| General Description |
- High flow, heat stabilized nylon 6 homopolymer
- Recommended for general purpose nylon molding applications in both thin and heavy sections
- NX4728 has special additives to enhance clarity and brilliance of color and is available in translucent white and a variety of colors
- Optimum processing conditions should provide a melt temperature of 450°F - 470°F at the nozzle
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
11,500 |
| Elongation | D638 |
% |
40 |
| Flexural Modulus | D790 |
psi MPa |
390,000 |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
0.8 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 264 psi/1.82 MPa | D648 |
°F °C |
154 |
| DTUL @ 66 psi/0.45 MPa | D648 |
°F °C |
360 |
| Approvals and Classifications | Approval | Rating | |
| UL Flammability Rating | V-2 | ||
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23