 |
|
NYLENE 5213-02 |
|
TECHNICAL DATA SHEET |
|
| General Description |
- 13% glass fiber reinforced economy grade, heat-stabilized nylon 6 injection molding resin
- Heat and chemical resistance and excellent surface appearance associated with nylon 6 resins
- Improved strength and stiffness properties over unreinforced nylon
- Suitable for uses such as handles and levers, brackets, housings and enclosures
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
0.8 43 |
| Elongation | D638 |
% |
3 |
| Flexural Modulus | D790 |
psi MPa |
700,000 4828 |
| Tensile Strength | D638 |
psi MPa |
15,000 110 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 264 psi/1.82 MPa | D648 |
°F °C |
370 188 |
| Melt Point | D3418 |
°F °C |
420 215 |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23