 |
|
NYLENE 9110 G43 |
|
TECHNICAL DATA SHEET |
|
| General Description |
- 43% glass fiber reinforced nylon 6/10 injection molding grade
- Has the high strength and stiffness of reinforced nylon, while also having the reduced moisture pick-up associated with nylon 6/10
- Suitable for pump housings, inlet housings, fittings, and other uses where moisture pickup may be a concern
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
24,000 166 |
| Elongation | D638 |
% |
20 |
| Flexural Modulus | D790 |
psi MPa |
1,500,000 10,345 |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
3.0 160 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 264 psi/1.82 MPa | D648 |
°F °C |
398 203 |
| Melt Point | D3418 |
°F °C |
430 221 |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23