 |
|
NYLENE 9110 |
|
TECHNICAL DATA SHEET |
|
| General Description |
- General purpose unreinforced nylon 6/10 injection molding grade
- Has heat and chemical resistance inherent in nylons, while also having the reduced moisture pick-up associated with nylon 6/10
- Suitable for clips, bushings, housings, and other uses where moisture pickup may be a concern
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
9,000 62 |
| Elongation | D638 |
% |
70 |
| Flexural Modulus | D790 |
psi MPa |
295,000 2035 |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
0.9 48 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 264 psi/1.82 MPa | D648 |
°F °C |
144 62 |
| DTUL @ 66 psi/0.45 MPa | D648 |
°F °C |
345 174 |
| Melt Point | D3418 |
°F °C |
418 214 |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23