 |
|
NYLENE 9543 |
|
TECHNICAL DATA SHEET |
|
| General Description |
- 43% glass fiber reinforced heat stabilized nylon 6/12
- Good chemical properties and reduced moisture absorption of nylon 6/12 resins while adding glass reinforcement to increase strength and stiffness
- Suitable in applications where typical nylon 6 or 6/6 may be unsuitable due to moisture absorption or specific chemical requirements
- On Special Order only.
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
24,000 166 |
| Elongation | D638 |
% |
5 |
| Flexural Modulus | D790 |
psi MPa |
1,230,000 8985 |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
2.0 107 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 264 psi/1.82 MPa | D648 |
°F °C |
410 210 |
| Melt Point | D3418 |
°F °C |
435 224 |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23