NYLENE NX4747
TECHNICAL DATA SHEET

 
General Description    

  • Heat stabilized nylon copolymer with 14% glass fiber reinforcement
  • Developed to have excellent light transmittance combined with high strength, stiffness, and resistance to automotive type fluids
  • Suitable for such uses as under-the-hood fluid reservoirs
  • Maximum clarity is achieved by using low mold temperatures
 

Properties   

Physical Properties
Test Method
Units
Dry as Molded
 
Mechanical Properties
Test Method
Units
Dry as Molded
Tensile Strength
D638
psi MPa
18,000 124
Elongation
D638
%
3.5
Flexural Modulus
D790
psi MPa
770,000 5310
Notched Izod @ 23 °C
D256
ft. lb./ in. J/m
1.3 70
 
Thermal Properties Test Method Units
Dry as Molded
DTUL @ 264 psi/1.82 MPa
D648
°F °C
370 188
Melt Point
D3418
°F °C
410 210
 
 
Notes
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.


Issued: 2009/09/23