 |
|
NAXEL PC504 |
|
TECHNICAL DATA SHEET |
|
| General Description |
- 20% glass fiber reinforced Polycarbonate
- Improved stiffness over un-reinforced PC grades
- Suitable for applications such as housings, brackets, levers, and other uses that require toughness with increased stiffness
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
13,000 90 |
| Elongation | D638 |
% |
5 |
| Flexural Modulus | D790 |
psi Mpa |
720,000 4965 |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
1.5 80 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 264 psi/1.82 MPa | D648 |
°F °C |
280 138 |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23