 |
|
NYLENE 743HS |
|
TECHNICAL DATA SHEET |
|
| General Description |
- Heat stabilized, high impact modified nylon suitable for both
molding and extrusion.
- In addition to heat stabilization to prevent thermal degradation,
parts molded from 743HS have excellent R.T. and C.T. impact strength right out
of the mold without post conditioning.
- Outstanding features of Nylene 743HS
include high strength and high cold temperature impact.
- Cylinder temperatures should be in the 435 - 525°F range.
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D 638 |
7,700 |
|
| Elongation | D 638 |
150 |
|
| Flexural Modulus | D 790 |
Psi |
230,000 |
| Notched Izod, R.T. | D 256 |
ft.lb./in. |
17.0 |
| Flexural Strength | D 790 |
Psi |
9,000 |
| Notched Izod, C.T., -40C | D 256 |
ft.lb./in. |
3.5 |
| ARM Drop Impact, R.T | ARM |
ft.lbs. |
150 |
| ARM Drop Impact, C.T., -30C | ARM |
ft.lbs. |
150 |
| ARM Drop Impact, C.T., -40C | ARM |
ft.lbs. |
150 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| Melt Point | D 3418 |
°C |
219 |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: