General Description

Specially formulated nylon powder for the ROTOMOLDING process
Heat stabilized
Dried to less than 0.20% moisture and packaged in foil-lined drums to eliminate the need for pre-drying
Strongly recommend the use of an inert gas such as nitrogen in the mold to minimize thermal degradation during processing

Notes

Testing conducted on dry-as-molded specimens at 73F

All Nylene rotomolding grade nylons are dried to less than 0.15% moisture eliminating the need for pre-drying of virgin material

Nylene strongly recommends the use of inert gases such as nitrogen in the mold to minimize thermal degradation of the nylon

Issued: 2014/02/25